The Optronics RV Interior Double Dome Light with Switch # RVIL22 should be a good replacement for your Bargman RV light that starts with 30-93, although it is not an exact match in terms of size.
It is similar though, with the Optronics measuring 12" long x 4-1/4" tall x 1-13/16" thick and based on my research the Bargman is 11-1/2" x 4-7/16" x 1-3/4" so unless there is a reason the different sizes will not allow you to install the Optronics light it should work for you.
I have added... view full answer...
LaSalle Bristol RV Interior Bunk Light with Fan # 344410FAN6008RT is a general-purpose 12V accessory light/fan that will work in many RVs and tents. It is not intended to replace any specific OEM trailer light but it will work well for you as long as the RV has a female 12V barrel plug power connector to match the male plug shown in the linked photo. You can see more details on this item in the linked video. view full answer...
The Optronics LED RV Interior Light with Switch - 9 Diode - Surface Mount # RVILL33 is a dimmable LED Light when used with a compatible dimmer switch. We don't carry the dimmer switch, but according to my contact it will be compatible. They said the switch will dictate how well it dims. Many other lights like the LED Interior Trailer Dome Light - 39 Diode - White Housing # ILL39CB can also be dimmed using a dimmer switch, but there are a few lights that are not dimmable.
The LED lights... view full answer...
The RV Combination Interior Light with Fan and Cord part # 328-001-103 uses a 1/4" jack so if that is what you have on your trailer then yes, it will work for you. Otherwise, you would need to obtain the RV Bunk Light Adapter with Jack part # RVC100 which is designed specially for the above light/fan. The light/fan does use 12 VDC power.
Unfortunately, I don't have any info on the jacks you have on your 2007 Coleman Highland Avalon. view full answer...
The LED RV interior Light part # 328-K-1050Q9 uses 18 gauge wire. You can use a 16 gauge wire part # 16-1-1 with butt connectors part # DW05744-5 to install the light. The 16 gauge is bit larger but will work well for installation. The white wire from the light is the ground wire and the black wire is the power wire. view full answer...
Optronics LED RV Interior Light with Switch - 18 Diode - Surface Mount - White Housing Item # RVILL34 could potentially cover the existing screw holes for the factory light. This particular light is 10-5/16" long x 4-3/16" tall x 1-13/16" deep.
As for its mounting holes there are several and I have included a picture showing them and the spacing for you. With this information you can determine if the light will use the same mounting holes or if new ones will be needed. view full answer...
Yes the Optronics LED RV Interior Double Dome Light with Switch part # RVILL34 would be a great light to have above your shower stall. I like the really bright and clear light that this on produces. Since it is LED you won't have to worry about changing any bulbs and the LEDs tend to last much longer that he standard incandescent and don't draw as much power. This would be a solid choice.
I linked a video of Hayden showing the install process and how it works below. Happy Camping! view full answer...
Yes, you can use Opti-Brite RV Interior Strip Light w/ Switch - Awning Mount - White LEDs - Polished Chrome Housing Item # ILL70CCSBAWN on your Winnebago. And also yes on leaving its switch on and using the Winnebago switch to turn the light on and off! I have included a link to a video on this light for you. view full answer...
We unfortunately don't have a light that small so you'll have to switch over from a recessed mount to a surface puck light in order to replace your interior lights. The smallest surface mount option that we currently offer is the Gustafson 12V RV LED Puck Light # 277-000342. These are 3-5/8" in diameter so they'll take up a bit more space and may not be the right option for every light depending on the surrounding area, but should be able to fit in the majority of spaces.
To install them... view full answer...
Considering the limited space that you have in your truck camper the Thinline Opti-Brite LED Interior Strip Light - 21-7/8" Long x 1" Wide x 5/8" Thick Item # ILL72CB is a great choice. I linked a video review of this light for you.
Something like Blazer's RV LED Interior Dome Light with On/Off Switch - 6 Diodes - Aero Style - Clear Lens Item # 398SB could also be a simple solution. view full answer...
The Optronics LED RV Interior Double Dome Light with Switch # RVILL34 has not been known to cause any interference whatsoever with TV, and I can imagine that what you are experiencing is extremely frustrating, though this light will not cause any of those problems.
This is a surface mount light that will be a great fixture for you to solve the interference issues you are having as there are no known issues at all with these lights.
I have added a link to a video review of the Double... view full answer...
The Gustafson RV LED Utility Strip Light - 6W - Black Housing - Clear Lens - 8" Long # 277-000493 is designed for interior and exterior use. It is water resistant but not waterproof meaning it isn't designed to be completely submerged. view full answer...
The Gustafson 12V RV LED Ceiling Light # GUS54FR is only designed to be used with a switch, which is why you're hearing that buzzing noise.
We have some other lights with this diameter for the interior of an RV but unfortunately none of them are designed to work with a dimmer switch. view full answer...
There are many 12V LED lights which are available for the inside of a cargo trailer. The thing about LED lights, however, is that you are never going to have to pull a light out of the socket and replace it with a new one. For example, the Optronics # RVILL34 is a surface-mounted LED light with 18 diodes, which is what provides the light. They last very long with just 0.6 amps of power draw and a lifetime warranty for the lights. You can see how bright the lights are by the photo I've added.... view full answer...
The 9 diode Command LED RV Interior Light with Switch part # 328-K-1050Q9 will work to replace your existing 6 diode light as long as it is the size you need. I recommend replacing the dome light with a light similar in size or larger to your existing light. I was not able to find any information on your existing light but the 9 diode light measures 4-1/2" diameter x 3/4" deep so that you can compare.
The mounting holes are 3-3/4" apart center to center so if your existing light has... view full answer...
I wasn't able to find the dimensions of your current lights but there's definitely a wide variety of options that you can go with. You'll want to first measure the diameter of your lights and determine if they're surface mount and recessed mount. For example, the Command 12V RV LED Puck Light # 328-K-1050Q9 you were looking at has a 4-1/2" diameter and is a surface mount. Depending on the bolt pattern of the surface mount light you could also use it over a recessed hole.
If you wanted... view full answer...
The diamond 1383 LED Bulb - Single Contact Bayonet Style - 180 Degree part # DI92VR is designed to replace the 1383 bulb so it is not going to work to replace your RG921 bulb. You can replace the RG921 with a LED 921 bulb part # DI64ZR which puts out 230 lumens. This is going to be much brighter than your existing incandescent bulb. view full answer...
The closest similar options to the Opti-Brite LED Dome Light # OPT58FR with an on off switch are the Gustafson RV Pancake Light - Double Dome Item # 277-000340 with 11-1/2" L x 5" W dimensions or the Gustafson RV LED Dome Light w/ Button # 277-000492 with 9" L x 4" W. view full answer...
The LED RV Interior Can Light - 280 Lumens - Spring Mount - Frosted Glass Lens Item # DG52525VP will require a 4" hole to mount into.
The Recessed LED Light for RVs - White Metal Housing - Glass Lens Item # 324-000099 is a fit for your 3-1/2" cutout so you won't have to widen the holes. view full answer...
I wasn't able to find much about the Bargman 30-73-011 except for that it looks like a square dome light with a switch, for which you could use pretty much any dome light you want to replace it. Personally, I would go with a surface-mount LED light like the Opti-Brite 12V/24V LED RV Dome Light # OPT58FR, but we also have a more traditional look with part # RVILL34 or more rectangular look with part # ILL06COB.
If you can get me some dimensions on your current light I can see if there's... view full answer...
Go To Results